Gas heaters are divided into: umbrella-shaped gas heaters and cabinet-type portable gas heaters. These two types of gas heaters are divided into liquefied gas type and type according to the applicable fuel. Among them, umbrella-shaped gas heaters are also called outdoor heaters, outdoor gas heaters, umbrella heaters, gas heaters, lamp heaters, umbrella heaters, umbrella heaters, etc.
Precautions for gas heaters
1. The liquefied gas used in the gas heater must be pure propane liquefied gas. Pure propane liquefied gas is 5-10 yuan more expensive than ordinary liquefied gas per can (15 kg can). (The main components of liquefied gas include propane, butane, propylene, butene, etc. The quality of pure propane is better than that of liquefied gas, and the price is much more expensive. Generally, propane is used more in industry and hotels.) The companies that usually deliver liquefied gas are all There are propane liquefied gas and liquefied gas, as long as you want pure propane gas when you buy it.
2. Because the long-open fire function of the umbrella-shaped gas heater is very troublesome to use, the umbrella-shaped heaters produced by various manufacturers in the past two or three years have basically cancelled the long-open fire function. Therefore, during the operation process, once the control knob is turned To the deflated position, press the igniter continuously until it ignites. If the ignition action is too slow, a lot of gas will be released, affecting the smell of the space.
3. The cabinet gas heater usually uses the first gear to ignite except the first gear, which is ignited directly. It takes about 2-3 seconds, and a small amount of gas will be discharged during this 2-3 seconds. , causing space odor, so it is not recommended to switch frequently. In addition, some small factories produce low-quality cabinet heaters, and the ignition time of the 2nd and 3rd gears is relatively long, some even as long as 1 minute. In this case, the user can shake hands in front of the combustion plate to accelerate the air flow, so that It can greatly shorten the ignition time and reduce gas leakage.
